 |
SANTOTRAC® TRACTION LUBRICANTS
These lubricants,
ordinarily liquid, under extreme pressures in the contact zone form solid films which
keep surfaces with potential metal-to-metal contact apart, as well as provide traction.
This results in increased speeds, enhanced power output, wear prevention, and extended
useful life of the equipment. Traction is measured by coefficient of traction, which
is the ratio of transmitted force to contact force. Traction coefficient of SantoTrac
fluids at 40°C and 5-10% slide-to-roll ratio is in excess of 0.1. While these
lubricants are fluids of choice for many applications involving elasto-hydrodynamic
lubrication, such as gear systems, ball and roller bearings, rolling assemblies,
and belt drives, they are especially useful in extending the life of the industrial
gear-less Planetroll type systems and are also the choice lubricants for the new
generation automotive transmission systems, where continuously variable transmissions
(CVT) are used.
Unlike other lubricants that employ traction-inducing additives, our traction lubricants
are derived from synthetic hydrocarbon base fluids with inherent traction properties
and therefore maintain their effectiveness during extended use.
SantoTrac lubricants are produced in a range of viscosity grades, wide enough to
enable the user to select the most suitable viscosity for particular operating conditions
and applications. All grades offer stability at high temperature, high
shear resistance, high coefficient of traction, and good lubricating performance.
Some of our standard products include the following. |
|
TDS >
SANTOTRAC
32
MSDS >
SANTOTRAC
32 |
SANTOTRAC
32 - Low Viscosity, High Traction Fluid
SANTOLUBE
32 Lubricating Fluid is a low viscosity synthetic hydrocarbon-based traction fluid
that is especially designed for applications where low to medium film strength is
desired. This product has high coefficient of traction and is fortified with a proprietary
additive system to enhance its antiwear and extreme load-carrying and high temperature
properties. This product is especially useful in operating environment that requires
enhanced oxidation stability and increased protection against rust and corrosion.
SANTOLUBE 32 is essentially nontoxic, especially when proper hygienic practices are
followed. |
|
TDS >
SANTOTRAC
50
MSDS >
SANTOTRAC
50 |
SANTOTRAC
50 - Low Viscosity, High Traction Fluid
SANTOTRAC
50 Traction Fluid is a low viscosity synthetic hydrocarbon-based traction fluid that
is especially designed for applications where low to medium film strength is desired.
This product has high coefficient of traction and is fortified with a proprietary
additive system to enhance its antiwear and extreme load-carrying and high temperature
properties. This fluid is approved for use in and around food manufacturing machinery
where there is no chance of food contamination. SANTOTRAC 50 is essentially nontoxic,
especially when proper hygienic practices are followed. |
|
TDS >
SANTOTRAC
70
MSDS >
SANTOTRAC
70 |
SANTOTRAC
70 - High Viscosity, High Traction Lubricant
SANTOTRAC
70 Traction Fluid is a medium viscosity synthetic hydrocarbon-based traction fluid
that is especially designed for applications where medium to high film strength is
desired. This product has high coefficient of traction and is fortified with a proprietary
additive system to enhance its antiwear and extreme load-carrying and high temperature
properties. SANTOTRAC 70 is essentially nontoxic, especially when proper hygienic
practices are followed. |
|
TDS >
SANTOTRAC 332-FG
MSDS >
SANTOTRAC 332-FG |
SANTOTRAC
332-FG - Food Grade Traction Fluid
SANTOTRAC
332-FG Traction Fluid is a low viscosity synthetic hydrocarbon-based traction fluid
that is especially designed for use in high-speed operations where low to medium
film strength is desired. This product has high coefficient of traction and is fortified
with a proprietary additive system to enhance its antiwear and extreme load-carrying
and high temperature properties. This product is especially useful in operating environments
that require enhanced oxidation stability and increased protection against rust and
corrosion. SANTOTRAC 332-FG carries H1 credentials hence its incidental contact with
food and drugs during manufacture must not be of concern. This fluid is essentially
nontoxic, especially when normal hygienic practices are followed. |
|
TDS >
HYDRATORQUE 1842B
MSDS >
HYDRATORQUE 1842B |
HYDRATORQUE
1842B - Low Viscosity, Medium Traction Fluid
HYDRATORQUE
1842-B automotive lubricant is a low viscosity synthetic hydrocarbon -synthetic ester
blend that is fortified with a proprietary additive system to impart or enhance desirable
properties. HYDRATORQUE 1842-B is designed for applications that require good film
strength, excellent low and high-temperature viscometrics, superior thermo-oxidative
stability, and outstanding antiwear and rust and corrosionperformance. HYDRATORQUE
1842-B is essentially nontoxic, especially when proper hygienic practices are followed. |
|
TDS >
SANTOTRAC MCS-2080A
MSDS >
SANTOTRAC MCS-2080A |
SANTOTRAC
MCS-2080A - Aviation Traction Fluid
SANTOTRAC
2080A Traction Fluid is a low viscosity synthetic hydrocarbon-based traction fluid
that is especially designed for applications where low to medium film strength is
desired. This product has high coefficient of traction and is fortified with a proprietary
additive system to enhance its antiwear and extreme load-carrying and high temperature
properties. This product is especially useful in operating environments that require
enhanced oxidation stability and increased protection against rust andcorrosion.
SANTOTRAC 2080A is essentially nontoxic, especially when proper hygienic practices
are followed. |
|
