| 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
PRODUCT NAME: SANTOVAC OS-105™ LUBRICANT
Date: 9/7/05
Chemical Family: phenyl ether derivative
SANTOVAC® FLUIDS LLC, 8 Governor Drive, St. Charles, MO 63301
FOR CHEMICAL EMERGENCY, SPILL LEAK, FIRE, EXPOSURE, OR ACCIDENT: Call CHEMTREC - Day or Night - 800-424-9300. Toll free in the continental U.S., Hawaii, Puerto Rico, Canada, Alaska, or Virgin Islands. For calls originating elsewhere: 703-527-3887 (collect calls accepted).
For additional non-emergency information, call: 636-723-0240
| 2. COMPOSITION/INFORMATION ON INGREDIENTS |
OS-105™ is a phenyl ether derivative.
It is not a hazardous chemical(s) under the criteria of the OSHA Hazard Communication Standard (29 CFR 1910.1200).
| 3. HAZARDS IDENTIFICATION |
emergency overview
Appearance and odor: light yellow essentially clear liquid with no odor to slight phenolic odor
no significant hazards associated with this material
potential health effects
Likely Routes of Exposure: skin contact
Occupational exposure to this material has not been reported to cause significant adverse health effects. On the basis of available information, exposure to OS-105™ lubricant is not expected to produce significant adverse human health effects when recommended safety precautions are followed.
Refer to Section 11 for toxicological Information.
| 4. FIRST AID MEASURES |
if in eyes or on skin, immediate first aid is not likely to be required. However, this material can be removed by washing thoroughly with soap and water. Wash heavily contaminated clothing before reuse.
if inhaled, immediate first aid is not likely to be required. However, if symptoms occur, remove to fresh air. Remove material from eyes, skin and clothing.
if swallowed, immediate first aid is not likely to be required. A physician or Poison Control Center can be contacted for advice.
| 5. FIRE FIGHTING MEASURES |
Extinguishing Media: In case of fire, use water spray (fog), foam, dry chemical, or CO2.
Unusual Fire and Explosion Hazards: None known
Fire Fighting Equipment: Fire fighters and others exposed to products of combustion should wear self-contained breathing apparatus. Equipment should be thoroughly decontaminated after use.
| 6. ACCIDENTAL RELEASE MEASURES |
Contain large spills with dikes and transfer the material to appropriate containers for reclamation or disposal. Absorb remaining material or small spills with an inert material and then place in a chemical waste container. Flush residual spill area with water.
Refer to Section 13 for disposal information and Section 15 for reportable quantity information.
| 7. HANDLING AND STORAGE |
HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND SAFETY PRACTICES. THESE PRACTICES INCLUDE AVOIDING UNNECESSARY EXPOSURE AND REMOVAL OF MATERIAL FROM EYES, SKIN AND CLOTHING.
Emptied container retains vapor and product residue. Observe all labeled safeguards until container is cleaned, reconditioned, or destroyed.
Storage: Product is stable under normal conditions of storage and handling.
| 8. EXPOSURE CONTROLS/PERSONAL PROTECTION |
Eye Protection: This product does not cause significant eye irritation or eye toxicity requiring special protection. Use good industrial practice to avoid eye contact.
Skin Protection: Although it does not present a significant skin concern, minimize skin contamination by following good industrial practice. Wearing protective gloves is recommended. Wash hands and contaminated skin thoroughly after handling.
Respiratory Protection: Avoid breathing mist. Use NIOSH/MSHA approved respiratory protection equipment when airborne exposure is excessive. Consult respirator manufacturer to determine appropriate type equipment for given application. Observe respirator use limitations specified by NIOSH/MSHA or the manufacturer. Respiratory protection programs must comply with 29 CFR 1910.134.
Ventilation: Provide natural or mechanical ventilation to minimize exposure. If practical, use local mechanical exhaust ventilation at sources of air contamination such as open process equipment.
Airborne Exposure limits: OS-105™ Lubricant
| 9. PHYSICAL AND CHEMICAL PROPERTIES |
Appearance: yellow essentially clear liquid
Odor: odorless to slight phenolic
Pour Point: -60°F
Specific Gravity: 1.01 @ 25/25°C
pH: neutral
Vapor Density: 15.5 (air = 1)
Solubility: soluble in acetone and light aromatic solvents; insoluble in water
NOTE: These physical data are typical values based on material tested but may vary from sample to sample. Typical values should not be construed as a guaranteed analysis of any specific lot or as specifications for the product.
| 10. STABILITY AND REACTIVITY |
Stability: Product is stable under normal storage and handling conditions.
Materials to Avoid: Exposure to materials that are highly oxidizing should be avoided.
Hazardous Decomposition Products: Continued use at temperatures above 300°C may result in the formation of benzene and phenol. If the product is burned, complete combustion produces carbon dioxide and water and partial combustion produces carbon monoxide, smoke, soot and low molecular weight hydrocarbons.
Hazardous Polymerization: Does not occur.
| 11. TOXICOLOGICAL INFORMATION |
Santovac® Fluids LLC has not conducted toxicity studies with this product.
| 12. ECOLOGICAL INFORMATION |
Santovac® Fluids LLC has not conducted environmental toxicity studies with this product.
| 13. DISPOSAL CONSIDERATIONS |
This material when discarded is not a hazardous waste as defined by the Resource, Conservation and Recovery Act (RCRA), 40 CFR 261. Dispose of in accordance with all federal, state and local environmental regulations. Recommended method of disposal is by high temperature incineration at a RCRA approved TSDF. If there are any questions regarding the disposal of this material, please consult the Environmental, Health & Safety Department of Santovac Fluids LLC at 636-946-2355.
| 14. TRANSPORT INFORMATION |
The data provided in this section is for information only. Please apply the appropriate regulations to properly classify your shipment for transportation.
This product is not hazardous under the applicable DOT, ICAO/IATA, or IMDG regulations.
| 15. REGULATORY INFORMATION |
TSCA Inventory: All Components are listed.
SARA Hazard Notification:
CERCLA Reportable Quantity: Not Applicable
Refer to Section 2 for OSHA Hazardous Chemical(s) and Section 13 for RCRA classification.
| 16. OTHER INFORMATION |
Reason for revision: original
Revision number: original
OS-105™ is a trademark of Santovac® Fluids LLC.
NOTICE: Although the information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed to be correct as of the date hereof, SantoLubes LLC makes no representations as to the completeness or accuracy thereof. Information is supplied upon the conditions that the persons receiving same will make their own determinations as to its suitability for their purposes prior to use. In no event will SantoLubes LLC be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
Date: 10/14/05 Supersedes: N/A